販売終了

X10SLL

JAN/UPC:0672042141203
メーカー型番:MBD-X10SLL+-F-O
TEKWIND型番:SPM-MBD-X10SLL+-F-O/1Y

【主な特長】

1. Single socket H3 (LGA 1150) supports Intel® Xeon® E3-1200 v3/v4, 4th gen. Core i3, Pentium, Celeron processors
2. Intel® C222 Express PCH
3. Up to 32GB DDR3 ECC 1600MHz UDIMMs in 4 sockets
4. Dual Gigabit Ethernet LAN ports(1x Intel® i217LM & 1x Intel® i210AT)
5. 2x SATA (6Gbps), 4x SATA (3Gbps)
6. 1x PCI-E 3.0 x8 (in x16), 1x PCI-E 3.x8, and 1x PCI-E 2.0 x4 (in x8) slots
7. 2x USB 3.0 (1 Type-A + 1 via header)6x USB 2.0 (4 rear + 2 via header)
8. Integrated IPMI 2.0 with KVM andDedicated LAN
9. SATA DOM power connector support
10. VGA D-sub connector, TPM header


製品についてお気軽にお問い合わせください

この製品を問い合わせる

スペック

Product SKUs

MBD-X10SLL-F X10SLL-F (Bulk Pack)

Physical Stats

Form Factor microATX
Dimensions 9.6" x 9.6", (24.4cm x 24.4 cm)

Processor/Cache

CPU Intel® Xeon® processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150)

System Memory

Memory Capacity 4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5V, 1.35V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset Intel® C222 Express PCH
SATA SATA3 (6Gbps) w/ RAID 0, 1
SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 with 10/100/1000M bps MAC
Network Controllers Intel® i217LM + Intel® i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI)
VGA BMC integrated Aspeed AST2400

Input / Output

Serial ATA 2x SATA3 (6Gbps) ports
4x SATA2 (3Gbps) ports
LAN 2x Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 2x USB 3.0 ports (1 Type-A, 1 via header)
6x USB 2.0 ports (4 rear, 2 via header)
VGA 1x VGA D-Sub Connector
Serial Port / Header 2x COM ports (1 rear, 1 header)
DOM SATA DOM (Disk on Module) power connector support
TPM 1x TPM 1.2 20-pin Header

Chassis (Optimized for X10SLL-F )

1U Chassis: SC113MTQ-R400CB
SC113MTQ-330CB
SC811TQ-441B
SC512F-350B
SC512F-441B
SC813MTQ-R400CB
SC813MTQ-350CB
SC813MTQ-441CB
2U Chassis: SC213LT-563LPB
SC213LT-600LPB
SC825MTQ-R700LPB
SC823TQ-653LPB
3U Chassis: SC833T-653B
Mid/Mini Tower Chassis: SC733TQ-665B
SC731i-300B
SC732I-500B
SC732i-865B
SC732D2-903B
SC732D2-865B
SC732D2-500B
SC732D4-903B
SC732D4-865B
SC732D4-500B
SC733TQ-500B
4U / Tower Chassis: SC745TQ-920B
SC745TQ-R920B
SC743TQ-865B-SQ
SC842i-500B
SC842TQ-665B
SC842TQ-865B
Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.

SuperServer(s) with X10SLL-F

Model(s) SYS-5038D-I
SYS-5018D-MF

Expansion Slots

PCI-Express 1x PCI-E 3.0 x8 (in x16) slot
1x PCI-E 3.0 x8 slot
1x PCI-E 2.0 x4 (in x8) slot

System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support

Management

Software IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
Power Configurations ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on

PC Health Monitoring

Voltage Monitors for CPU Cores, +12V, +3.3V, +5V,+5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN Total of five 4-pin fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
+5V Standby alert LED
Other Features Chassis intrusion detection
Chassis intrusion header

Operating Environment

Operating Temperature Range 0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range -40°C ~ 70°C (-40°F ~ 158°F)
Operating Relative Humidity Range 8% ~ 90% (non-condensing)
Non-Operating Relative Humidity Range 5% ~ 95% (non-condensing)

この製品の問い合わせ

プロフェッショナルがいるテックウインドの強み

製品検索

製品カテゴリー
製品名
メーカー指定
並び順      
販売状況
販売店情報

会社情報ページへのバナー