メニュー

カテゴリー: 産業用/組込み用パーツ

販売終了

X10SL7-F

JAN/UPC:0672042133710
メーカー型番:MBD-X10SL7-F-O
TEKWIND型番:SPM-MBD-X10SL7-F-O/1Y

【主な特長】

1. Single socket H3 (LGA 1150) supports Intel® Xeon® E3-1200 v3/v4, 4th gen.Core i3, Pentium, Celeron processors
2. Intel® C222 Express PCH
3. Up to 32GB DDR3 ECC 1600MHz UDIMMs in 4 sockets
4. Dual Gigabit Ethernet LAN ports via Intel® i210AT
5. 2x SATA (6Gbps), 4x SATA (3Gbps)
6. 8x SAS2 (6Gbps) via LSI 2308
7. Expansion slots: 1x PCI-E 3.0 x8 (in x16), 1x PCI-E 2.0 x4 (in x8)
8. 2x USB 3.0 (1 Type-A + 1 via header)6x USB 2.0 (4 rear + 2 via header)
9. Integrated IPMI 2.0 with KVM and Dedicated LAN
10. SATA DOM power connector support
11. VGA D-sub connector, TPM header


スペック

Product SKUs

MBD-X10SL7-F X10SL7-F (Bulk Pack)

Physical Stats

Form Factor microATX
Dimensions 9.6" x 9.6", (24.4cm x 24.4 cm)

Processor/Cache

CPU Intel® Xeon® processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150)

System Memory

Memory Capacity 4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5V, 1.35V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset Intel® C222 Express PCH
SATA SATA3 (6Gbps) w/ RAID 0, 1
SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
SAS SAS2 (6Gbps) via LSI 2308
SW RAID 0, 1, 1E, 10 support
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 with 10/100/1000M bps MAC
Network Controllers Intel® i210AT dual port GbE Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI)
VGA BMC integrated Aspeed AST2400

Input / Output

Serial ATA 2x SATA3 (6Gbps) ports
4x SATA2 (3Gbps) ports
SAS 8x SAS2 (6Gbps) ports
LAN 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 2x USB 3.0 ports (1 via header, 1 Type-A)
6x USB 2.0 ports (4 rear, 2 via header)
VGA 1x VGA D-Sub Connector
Serial Port / Header 2x COM ports (1 rear, 1 header)
DOM SATA DOM (Disk on Module) power connector support
TPM 1x TPM 1.2 20-pin Header

Chassis (Optimized for X10SL7-F )

1U Chassis: SC113MTQ-R400CB
SC813MTQ-441CB
SC811TQ-441B
SC113MTQ-330CB
SC512F-350B
SC512F-441B
SC813MTQ-R400CB
SC813MTQ-350CB
2U Chassis: SC825MTQ-R700LPB
SC823TQ-653LPB
SC213LT-563LPB
SC213LT-600LPB
3U Chassis: SC835TQ-R920B
SC833T-653B
Mid/Mini Tower Chassis: SC732D4-865B
SC731i-300B
SC732I-500B
SC732i-865B
SC732D2-903B
SC732D2-865B
SC732D4-500B
SC733TQ-500B
SC732D2-500B
SC732D4-903B
4U / Tower Chassis: SC842TQ-865B
SC745TQ-920B
SC745TQ-R920B
SC842i-500B
SC842TQ-665B
Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.

SuperServer(s) with X10SL7-F

Model(s) SYS-1018D-73MTF
 

Expansion Slots

PCI-Express 1x PCI-E 3.0 x8 (in x16) slot
1x PCI-E 2.0 x4 (in x8) slot

System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support

Management

Software IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
Power Configurations ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on

PC Health Monitoring

Voltage Monitors for CPU Cores, +12V, +3.3V, +5V,+5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN Total of 5 fan headers supporting up to 5 fans
Five 4-pin fan headers
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
+5V Standby alert LED
Other Features Chassis intrusion detection
Chassis intrusion header

Operating Environment

Operating Temperature Range 0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range -40°C ~ 70°C (-40°F ~ 158°F)
Operating Relative Humidity Range 8% ~ 90% (non-condensing)
Non-Operating Relative Humidity Range 5% ~ 95% (non-condensing)

産業用/組込み用パーツに関連する導入事例

導入事例はありません。

産業用/組込み用パーツに関連する特集記事

会社情報ページへのバナー

(C) Tekwind Co., Ltd. ALL RIGHTS RESERVED.