販売終了

X8DTL-6F

JAN/UPC:0672042054879
メーカー型番:MBD-X8DTL-6F-O
TEKWIND型番:SPM-MBD-X8DTL-6F-O

1. Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
2. Intel® 5500 (Tylersburg) Chipset
3. Up to 96GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 24GB Unbuffered DIMM
4. Dual Intel® 82574L Gigabit Ethernet Controller
5. 6x SATA2 (3 Gbps) Ports via ICH10R Controller
6. 1 (x8) PCI-E 2.0 ( in x16 slot),
2 (x4) PCI-E 2.0 (in x8 slot),
1 (x4) PCI-E (in x8 slot),
2x PCI 33MHz slots
7. Integrated Matrox G200eW Graphics
8. LSI 2008 8-Port 6Gbps SAS Controller;RAID 0, 1, 10; RAID 5 optional
9. Integrated IPMI 2.0 with Dedicated LAN


製品についてお気軽にお問い合わせください

この製品を問い合わせる

スペック

Product SKUs

MBD-X8DTL-6F -O X8DTL-6F (Standard Retail Pack)
MBD-X8DTL-6F -B X8DTL-6F (Bulk Pack)

Physical Stats

Form Factor ATX
Dimensions 12" x 10" (30.5cm x 25.4cm)

Processor/Cache

CPU Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below:
Intel®
Xeon®Processor 5600 Series (Westmere)

Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
QPI up to 6.4 GT/s

System Memory

Memory Capacity 6x 240-pin DIMM sockets
Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
Memory Type 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage 1.5 V / 1.35V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset Intel® 5500 (Tylersburg) chipset
ICH10R + IOH-24D
SAS LSI 6Gbps SAS 2008
RAID 0, 1, 10 support
(Optional: AOC-SAS2-RAID5-KEY) RAID 5 support
SATA Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC
Network Controllers 2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics Matrox G200eW
Super I/O Winbond® 83627DHG-P chip

Input / Output

SAS 8x 6Gbps SAS / SATA ports
Serial ATA Six Serial ATA ports
Six SATA hard drives supported
LAN 2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 2x USB rear ports
1x USB on-board
2x USB internal headers
Total 5 USB 2.0 Compliant
VGA 1x VGA Port
Keyboard / Mouse PS/2 keyboard and mouse ports
Serial Port / Header 1 Fast UART 16550 serial port
1 Fast UART 16550 serial header (Option)

Chassis ( Optimized for X8DTL-6F )

1U Chassis CSE-811i-520
CSE-811T-420-INF
2U Chassis CSE-826TQ-R800LPB
3U Chassis CSE-833T-550B
CSE-833T-650B
CSE-833T-R760B
CSE-835TQ-R800B
CSE-835TQ-R920B
CSE-836A-R1200B
CSE-836TQ-R800B
CSE-933T-R760B
CSE-936A-R1200B
CSE-936A-R900B
Tower / 4U Rackmount CSE-745TQ-920B
Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, aRevision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.

Expansion Slots

PCI-Express 1 (x8) PCI-E 2.0 (1 in x16 slot)
2 (x4) PCI-E 2.0 (in x8 slot)
1 (x4) PCI-E (in x8 slot)
PCI 2x 33MHz PCI slots

System BIOS

BIOS Type 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support

Management

Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Power Configurations ACPI / ACPM Power Management

PC Health Monitoring

Voltage Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
4-Phase-switching voltage regulator
FAN Total of six fan headers supporting up to 6 fans
Six 4-pin fan headers
6x fans with tachometer status monitoring
Support 3-pin fans (w/o speed control)
Low noise fan speed control (4-pin fan only)
Temperature Monitoring for CPU and chassis environment
Thermal Control for 6x fan connectors
PECI
Other Features Chassis intrusion detection
Chassis intrusion header

Operating Environment / Compliance

RoHS RoHS Compliant 6/6, Pb Free
Environmental Spec. Operating Temperature: 10° to 35° C (50° to 95°F)
Non-operating Temperature: -40° to 70° C (-40° to 158° F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

OS Compatibility

• Please see our OS Compatibility Chart

この製品の問い合わせ

プロフェッショナルがいるテックウインドの強み

製品検索

製品カテゴリー
製品名
メーカー指定
並び順      
販売状況
販売店情報

会社情報ページへのバナー