AI/HPCシステム・セミオーダー型サーバー Supermicro(スーパーマイクロ) X10DRH-CT

・JAN/UPC：0672042171026
・メーカー型番：MBD-X10DRH-CT-O
・TEKWIND型番：SPM-MBD-X10DRH-CT-O/1Y

【主な特長】

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s
2. Intel® C612 chipset
3. Up to 1TB ECC DDR4 2133MHz;
16x DIMM slots
4. 1x PCI-E 3.0 x16, 6x PCI-E 3.0 x8 slots
5. Intel® X540 Dual port 10GBase-T
6. 10x SATA3 (6Gbps) ports w/ Intel
C612 controller; RAID 0, 1, 5, 10
7. 8x SAS3 (12Gbps) ports w/ LSI 3108
controller (2GB cache); RAID 0, 1, 5, 6, 10, 50, 60
8. Integrated IPMI 2.0 and KVM with edicated LAN
9. 5x USB 3.0 and 4x USB 2.0 ports

製品についてお気軽にお問い合わせください

この製品を問い合わせる

プロフェッショナルがいるテックウインドの強み

スペック

Product SKUs

MBD-X10DRH-CT -O	X10DRH-CT (Retail Pack)
MBD-X10DRH-CT -B	X10DRH-CT (Bulk Pack)

Physical Stats

Form Factor	E-ATX
Dimensions	12" x 13" (30.5cm x 33.2cm)

Processor/Cache

CPU	Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) Dual Socket R3 (LGA 2011)
Cores / Cache	Up to 18 Cores / Up to 45MB Cache
System Bus	QPI up to 9.6 GT/s
Note	** Motherboard supports this maximum TDP. Please verify your system can thermally support.

System Memory

Memory Capacity	16x 288-pin DDR4 DIMM slots Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type	2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB
Memory Voltage	1.2 V
Error Detection	Corrects single-bit errors

On-Board Devices

Chipset	Intel® C612 chipset
SAS	LSI 3108 SAS3 (12Gbps) controller; 2GB cache; HW RAID 0, 1, 5, 6, 10, 50, 60 Supports up to 16 devices as default, more HDD devices support is also available as an option * For special SKU, please contact your Supermicro Sales.
AHCI SATA	SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA	SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8211E PHY (dedicated IPMI)
Video	ASPEED AST2400 BMC

Input / Output

SAS	8x SAS3 (12Gbps) ports
SATA	10x SATA3 (6Gbps) ports
LAN	2x RJ45 10GBase-T ports 1x RJ45 Dedicated IPMI LAN port
USB	5x USB 3.0 ports (2 rear + 2 via header + 1 Type A) 4x USB 2.0 ports (2 rear + 2 via header)
Video	1x VGA Connector
Serial Port / Header	2x Fast UART 16550 serial 2x COM Ports (1 rear, 1 header)
DOM	2x SuperDOM (Disk on Module) ports
TPM	1x TPM 1.2 20-pin Header

Chassis (Optimized for X10DRH-CT )

2U Chassis:	SC826BE1C-R920LPB SC826BE2C-R920LPB SC826BAC4-R920LPB SC216BE1C-R920LPB SC216BE2C-R920LPB
3U Chassis:	SC836BE1C-R1K03B SC836BE2C-R1K03B SC835TQ-R920B
Mid/Mini Tower Chassis:	SC732D4F-903B SC732i-865B
4U / Tower Chassis:	SC743TQ-1200B SC847BE1C-R1K28LPB SC847BE2C-R1K28LPB
Important Chassis Notes	To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.

SuperServer(s) with X10DRH-CT

Model(s)	SSG-6028R-E1CR12T SYS-2028R-C1RT SYS-7048R-C1RT

Expansion Slots

PCI-Express	1x PCI-E 3.0 x16 6x PCI-E 3.0 x8

System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1

Management

Software	Intel® Node Manager 3.0 IPMI 2.0 SPM SUM SuperDoctor® 5 NMI Watch Dog
Power Configurations	ACPI / APM Power Management Power-on mode for AC power recovery

PC Health Monitoring

Voltage	Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 6 Phase-switching voltage regulator
FAN	8x 4-pin fan headers (up to 8 fans) 8x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED Suspend static indicator LED UID/Remote UID
Other Features	Chassis intrusion detection Chassis intrusion header SDDC Support RoHS

Operating Environment

Operating Temperature Range	10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range	-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range	8% - 90% (non-condensing)
Non-Operating Relative Humidity Range	5% - 95% (non-condensing)

産業用／組込み用パーツに関連する導入事例

導入事例はありません。

プロフェッショナルがいるテックウインドの強み

X10DRH-CT