・JAN/UPC:0672042094240
・メーカー型番:MBD-X9DRI-LN4F+-O
・TEKWIND型番:SPM-MBD-X9DRI-LN4F+-O/1Y
1. Dual socket R (LGA 2011) supports Intel Xeon processor E5-2600 and E5-2600 v2 family†
2. Intel C602 chipset; QPI up to 8.0GT/s
3. Up to 1.5TB ECC DDR3, up to 1866MHz; 24x DIMM sockets* Depends on memory configuration
4. Expansion slots: 4 x16 PCI-E 3.0, 1 x8 PCI-E 3.0, 1 x4 PCI-E 3.0 (in x8)
5. 4x Gigabit Ethernet LAN ports; Intel i350 GbE controller
6. 8x SATA2 and 2x SATA3 ports
7. Integrated IPMI 2.0 and KVM with Dedicated LAN
8. 9x USB 2.0 ports (4 rear, 4 via header + 1 Type A)
製品についてお気軽にお問い合わせください
この製品を問い合わせるスペック
Product SKUs
MBD-X9DRi-LN4F+ -B | X9DRi-LN4F+ (Bulk Pack) |
---|
Physical Stats
Form Factor | Enhanced Extended ATX |
---|---|
Dimensions | 13.68" x 13" (34.7cm x 33cm) |
Processor/Cache
CPU | Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP **) |
---|---|
Note | † BIOS version 3.0 or above is required |
Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
Cache | Up to 30MB |
System Bus | QPI up to 8 GT/s |
System Memory
Memory Capacity | 24x 240-pin DDR3 DIMM sockets Up to 1.5TB DDR3 ECC LRDIMM Up to 768GB DDR3 ECC RDIMM Up to 128GB DDR3 ECC/non-ECC UDIMM |
---|---|
Memory Type | 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. |
DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices
Chipset | Intel® C602 chipset |
---|---|
AHCI SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1, 5, 10 |
SCU SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
Network Controllers | Intel® i350 Gigabit Ethernet (x4 ports) Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
Video | Matrox G200eW |
Input / Output
AHCI SATA | 2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps) |
---|---|
SCU SATA | 4x SATA 2.0 ports (3Gbps) |
LAN | 4 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
USB | 9 USB 2.0 ports total (4 rear + 4 via header + 1 Type A) |
Video | 1 VGA port |
Serial Port / Header | 2 Fast UART 16550 ports: 1 rear and 1 header |
DOM | 1 DOM (Disk on Module) power connector |
TPM | 1 TPM 1.2 20-pin Header |
Chassis (Optimized for X9DRi-LN4F+ )
2U Chassis | CSE-825TQ-R740LPB CSE-826E16-R920LP |
---|---|
3U Chassis | CSE-835TQ-R920B CSE-836BA-R920B |
Tower / 4U Rackmount | CSE-745TQ-R920B CSE-846BE16-R920B CSE-847E16-R1K28LPB |
Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details. Please use optional I/O shield MCP-260-00041-0N in Supermicro 1U chassis |
SuperServer(s) with X9DRi-LN4F+
Model(s) | SSG-6027R-E1R12N SSG-6037R-E1R16N SSG-6047R-E1R24N SSG-6047R-E1R36N SSG-6027R-E1CR12N SSG-2027R-E1CR24N SSG-2027R-E1R24N SSG-6027R-E1CR36N |
---|
Expansion Slots
PCI-Express | 4 (x16) PCI-E 3.0 slots 1 (x8) PCI-E 3.0 slot 1 (x4) PCI-E 3.0 (in x8) slot (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) |
---|
System BIOS
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
---|---|
BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
Management
Software | SuperDoctor® III Watch Dog NMI IPMI 1.5 / 2.0 |
---|---|
Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
PC Health Monitoring
Voltage | Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 6+1 Phase-switching voltage regulator |
---|---|
FAN | 8x 4-pin fan headers (up to 8 fans) 8x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
LED | CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
Other Features | Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free |
Operating Environment
Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
---|---|
Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
Operating Relative Humidity Range | 8% - 90% (non-condensing) |
Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
関連製品
産業用/組込み用パーツ
MTE720T ― NVMe PCIe Gen4のM.2産業用SSD
112層3D NANDフラッシュ、8チャンネルコントローラー、PCIe Gen 4 x4インターフェースを組み合わせたM.2 SSD。NVMe 1.4規格準拠で、高速なデータ転送スピードを実現しています。
MTE460T ー PCIe Gen3の産業用M.2 SSD
PCIe Gen3 x2インターフェースと112層3D NAND搭載の産業用M.2 SSD。30µ"厚の金端子PCB、コーナーボンド、耐硫化チップ抵抗を適用し、-20℃~75℃の幅広い動作温度で使用できる製品です。
MSA470T ― SATA Ⅲと112層3D NAND搭載で小型端末に最適なmSATAの産業用SSD
トランセンド MSA470Tは、SATA Ⅲインターフェース、112層3D NAND、様々な技術と機能を搭載した業務用・産業用・組込向けの省スペースのmSATA SSD。
MTS970T ― SATA Ⅲ 6Gb/sと112層3D NANDの産業用M.2 2280 SSD
トランセンド MTS970T M.2 SSDは、SATA-III 6Gb/sインターフェース、112層の3D NANDフラッシュを採用し、DRAMキャッシュ搭載で高速アクセスを可能とするSSD。