・JAN/UPC：0672042148912
・メーカー型番：MBD-X10SLX-F-O
・TEKWIND型番：SPM-MBD-X10SLX-F-O/1Y
【主な特長】
1. Single socket H3 (LGA 1150) supports Intel® Xeon® E3-1200 v3/v4 processors
2. Intel® C222 Express PCH
3. Up to 32GB DDR3 1600MHz ECC UDIMMs (4x DIMMs)
4. Dual Gigabit Ethernet LAN ports (with 2x Intel® i210 chipset)
5. 2x SATA (6Gbps), 4x SATA (3Gbps)
6. 1x PCI-E 3.0 x8, 1x PCI-E 2.0 x4 (in x8),1x PCI-E 2.0 x1, 4x PCI-X 64-bit slots
7. 2x USB 3.0 (1 Type-A + 1 via header)7x USB 2.0 (4 rear + 3 via headers)
8. Integrated IPMI 2.0 with KVM and Dedicated LAN
9. SATA DOM power connector support
10. VGA D-sub connector, TPM header
製品についてお気軽にお問い合わせください
この製品を問い合わせるスペック
Product SKUs
| MBD-X10SLX-F | X10SLX-F (Bulk Pack) |
|---|
Physical Stats
| Form Factor | ATX |
|---|---|
| Dimensions | 12" x 9.6", (30.48cm x 24.4 cm) |
Processor/Cache
| CPU | Intel® Xeon® processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors (up to 95W TDP) Single Socket H3 (LGA 1150) |
|---|
System Memory
| Memory Capacity | 4x 240-pin DDR3 DIMM sockets Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) |
|---|---|
| Memory Type | 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5V, 1.35V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices
| Chipset | Intel® C222 Express PCH |
|---|---|
| SATA | SATA3 (6Gbps) w/ RAID 0, 1 SATA2 (3Gbps) w/ RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Aspeed AST2400 with 10/100/1000M bps MAC |
| Network Controllers | Intel® i210 Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8111E PHY (dedicated IPMI) |
| VGA | BMC integrated Aspeed AST2400 |
Input / Output
| Serial ATA | 2x SATA3 (6Gbps) ports 4x SATA2 (3Gbps) ports |
|---|---|
| LAN | 2x Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB 3.0 ports (1 Type-A, 1 via header) 7x USB 2.0 ports (4 rear, 3 via header) |
| VGA | 1x VGA D-Sub Connector |
| Serial Port / Header | 2x COM ports (1 rear, 1 header) |
| DOM | SATA DOM (Disk on Module) power connector support |
| TPM | 1x TPM 1.2 20-pin Header |
Chassis (Optimized for X10SLX-F )
| Mid/Mini Tower Chassis: | SC732I-500B SC732i-865B SC733I-500B SC733I-665B SC733TQ-500B SC733TQ-665B |
|---|---|
| 4U / Tower Chassis: | SC842i-500B SC842TQ-665B SC842TQ-865B |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details. |
Expansion Slots
| PCI-Express | 1x PCI-E 3.0 x8 slot 1x PCI-E 2.0 x4 (in x8) slots 1x PCI-E 2.0 x1 slot 4x PCI-X 64-bit slots |
|---|
System BIOS
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
|---|---|
| BIOS Features | DMI (SMBIOS) 2.7 ACPI 5.0 USB Keyboard support |
Management
| Software | IPMI (Intelligent Platform Management Interface) v2.0 with KVM support SuperDoctor® III Watch Dog NMI |
|---|---|
| Power Configurations | ACPI / ACPM Power Management Main Switch Override Mechanism Power-on mode for AC power recovery Internal/External modem ring-on |
PC Health Monitoring
| Voltage | Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
|---|---|
| FAN | Total of four 4-pin fan headers supporting up to 4 fans 4x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED +5V Standby alert LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
Operating Environment
| Operating Temperature Range | 0°C ~ 50°C (32°F ~ 122°F) |
|---|---|
| Non-Operating Temperature Range | -40°C ~ 70°C (-40°F ~ 158°F) |
| Operating Relative Humidity Range | 8% ~ 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% ~ 95% (non-condensing) |
関連製品
産業用／組込み用パーツ
MTE720T ― NVMe PCIe Gen4のM.2産業用SSD
112層3D NANDフラッシュ、8チャンネルコントローラー、PCIe Gen 4 x4インターフェースを組み合わせたM.2 SSD。NVMe 1.4規格準拠で、高速なデータ転送スピードを実現しています。
MTE460T ー PCIe Gen3の産業用M.2 SSD
PCIe Gen3 x2インターフェースと112層3D NAND搭載の産業用M.2 SSD。30µ"厚の金端子PCB、コーナーボンド、耐硫化チップ抵抗を適用し、-20℃~75℃の幅広い動作温度で使用できる製品です。
MSA470T ― SATA Ⅲと112層3D NAND搭載で小型端末に最適なmSATAの産業用SSD
トランセンド MSA470Tは、SATA Ⅲインターフェース、112層3D NAND、様々な技術と機能を搭載した業務用・産業用・組込向けの省スペースのmSATA SSD。
MTS970T ― SATA Ⅲ 6Gb/sと112層3D NANDの産業用M.2 2280 SSD
トランセンド MTS970T M.2 SSDは、SATA-III 6Gb/sインターフェース、112層の3D NANDフラッシュを採用し、DRAMキャッシュ搭載で高速アクセスを可能とするSSD。
製品検索
