カテゴリー: サーバー > サーバーシステム

販売終了

SuperServer 2027GR-TRF

JAN/UPC:0672042101146
メーカー型番:SYS-2027GR-TRF
TEKWIND型番:SPM-SYS-2027GR-TRF/1Y

1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
2. Up to 512GB ECC DDR3, up to 1866MHz; 8x DIMM sockets
3. 4x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards, opt.),
1x PCI-E 3.0 x8 (in x16) slot,
1x PCI-E 2.0 x4 (in x16) slot
4. Integrated IPMI 2.0 with KVM and Dedicated LAN
5. Intel® i350 Dual-Port GbE Controller
6. 10x Hot-swap 2.5" SATA Drive Bays
7. 1800W Redundant Power Supplies
Platinum Level (94%+)
8. 5x heavy duty cooling fans
9. Smart server management tools

この製品を問い合わせる


スペック

Product SKUs

SYS-2027GR-TRF SuperServer 2027GR-TRF (Black)

Motherboard

Super X9DRG-HF

Processor/Cache

CPU Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600 
and E5-2600 v2 family† 
(up to 130W TDP)
Note † BIOS version 3.0 or above is required
Cache Up to 30MB
System Bus QPI up to 8 GT/s
GPU/Xeon Phi Support M2090/M2075, up to 130W CPU at 35°C
K10/K20/K20X/K1/K2/K40M (Kepler), up to 130W CPU at 35°C
Xeon Phi 5110P, up to 130W CPU at 35°C

System Memory

Memory Capacity 8x 240-pin DDR3 DIMM sockets
Up to 512GB DDR3 ECC LRDIMM
Up to 256GB DDR3 ECC Registered memory (RDIMM)
Up to 48GB DDR3 ECC and non-ECC UDIMM
Memory Type 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5 V, 1.35 V
Error Detection Corrects single-bit errors
Detects double-bit errors
(using ECC memory)

On-Board Devices

Chipset Intel® C602 chipset
AHCI SATA SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
(Both CPUs need to be installed for LAN ports 1 and 2 to be enabled)
Video Matrox G200eW

Input / Output

SATA 2 SATA 3.0 ports (6Gbps)
8 SATA 2.0 ports (3Gbps)
LAN 2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB 2 USB 2.0 ports
Video 1 VGA Connector
Keyboard/Mouse 1 PS/2 Keyboard/Mouse port
Serial Port 1 Serial header

System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.3
UEFI
RTC (Real Time Clock) Wakeup

Chassis

Form Factor 2U Rackmount
Model CSE-218G-R1800B

Dimensions

Height 3.5" (89mm)
Width 17.2" (437mm)
Depth 31" (787mm)
Gross Weight 54 lbs (24.5 kg)
Available Color Black

Front Panel

Buttons Power On/Off button
System Reset button
LEDs Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

Expansion Slots

PCI-Express 4x PCI-E 3.0 x16 slots
(support GPU/Xeon Phi cards, option)
1x PCI-E 3.0 x8 (in x16) low-profile slot
1x PCI-E 2.0 x4 (in x16) slot

Drive Bays

Hot-swap 10x 2.5" Hot-swap drive bays

System Cooling

Fans 5x 8cm heavy duty fans with optimal fan speed control

Power Supply

1800W (1+1) Redundant 1800W power supply with PMBus
AC Input 1000W Output @ 100-120V, 12-10A, 50-60Hz
1200W Output @ 120-140V, 12-10A, 50-60Hz
1800W Output @ 200-240V, 10-8.5A, 50-60Hz
DC Output 1000W: +12V/84A; +5Vsb/4A
1200W: +12V/100A; +5Vsb/4A
1800W: +12V/150A; +5Vsb/4A
Certification Platinum Level Certified94%+    Platinum Certified

PC Health Monitoring

CPU Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
CPU Core 6-Phase-switching voltage regulator
FAN Total of five 4-pin PWM fans
5x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 10x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED Power Fail / Overheat LED
Suspend-state Indicator LED
UID LED
Other Features SDDC Support

Operating Environment / Compliance

RoHS RoHS Compliant
Environmental Spec. Operating Temperature: 
10°C to 35°C (50°F to 95°F)
Non-operating Temperature: 
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 
8% to 90% (non-condensing)
Non-operating Relative Humidity: 
5% to 95% (non-condensing)

(C) Tekwind Co., Ltd. ALL RIGHTS RESERVED.