販売終了

X10DRH-CT

JAN/UPC:0672042171026
メーカー型番:MBD-X10DRH-CT-O
TEKWIND型番:SPM-MBD-X10DRH-CT-O/1Y

【主な特長】

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s
2. Intel® C612 chipset
3. Up to 1TB ECC DDR4 2133MHz;
16x DIMM slots
4. 1x PCI-E 3.0 x16, 6x PCI-E 3.0 x8 slots
5. Intel® X540 Dual port 10GBase-T
6. 10x SATA3 (6Gbps) ports w/ Intel
C612 controller; RAID 0, 1, 5, 10
7. 8x SAS3 (12Gbps) ports w/ LSI 3108
controller (2GB cache); RAID 0, 1, 5, 6, 10, 50, 60
8. Integrated IPMI 2.0 and KVM with edicated LAN
9. 5x USB 3.0 and 4x USB 2.0 ports


製品についてお気軽にお問い合わせください

この製品を問い合わせる

スペック

Product SKUs

MBD-X10DRH-CT -O X10DRH-CT (Retail Pack)
MBD-X10DRH-CT -B X10DRH-CT (Bulk Pack)

Physical Stats

Form Factor E-ATX
Dimensions 12" x 13" (30.5cm x 33.2cm)

Processor/Cache

CPU Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache Up to 18 Cores / Up to 45MB Cache
System Bus QPI up to 9.6 GT/s
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.

System Memory

Memory Capacity 16x 288-pin DDR4 DIMM slots
Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
Memory Voltage 1.2 V
Error Detection Corrects single-bit errors

On-Board Devices

Chipset Intel® C612 chipset
SAS LSI 3108 SAS3 (12Gbps) controller; 
2GB cache; HW RAID 0, 1, 5, 6, 10, 50, 60
Supports up to 16 devices as default, more HDD devices support is also available as an option *

For special SKU, please contact your Supermicro Sales.
AHCI SATA SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers Intel® X540 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI)
Video ASPEED AST2400 BMC

Input / Output

SAS 8x SAS3 (12Gbps) ports
SATA 10x SATA3 (6Gbps) ports
LAN 2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear + 2 via header + 1 Type A)
4x USB 2.0 ports (2 rear + 2 via header)
Video 1x VGA Connector
Serial Port / Header 2x Fast UART 16550 serial
2x COM Ports (1 rear, 1 header)
DOM 2x SuperDOM (Disk on Module) ports
TPM 1x TPM 1.2 20-pin Header

Chassis (Optimized for X10DRH-CT )

2U Chassis: SC826BE1C-R920LPB
SC826BE2C-R920LPB
SC826BAC4-R920LPB
SC216BE1C-R920LPB
SC216BE2C-R920LPB
3U Chassis: SC836BE1C-R1K03B
SC836BE2C-R1K03B
SC835TQ-R920B
Mid/Mini Tower Chassis: SC732D4F-903B
SC732i-865B
4U / Tower Chassis: SC743TQ-1200B
SC847BE1C-R1K28LPB
SC847BE2C-R1K28LPB
Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.

SuperServer(s) with X10DRH-CT

Model(s) SSG-6028R-E1CR12T
SYS-2028R-C1RT
SYS-7048R-C1RT
 

Expansion Slots

PCI-Express 1x PCI-E 3.0 x16
6x PCI-E 3.0 x8

System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1

Management

Software Intel® Node Manager 3.0
IPMI 2.0
SPM
SUM
SuperDoctor® 5
NMI
Watch Dog
Power Configurations ACPI / APM Power Management
Power-on mode for AC power recovery

PC Health Monitoring

Voltage Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
6 Phase-switching voltage regulator
FAN 8x 4-pin fan headers (up to 8 fans)
8x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS

Operating Environment

Operating Temperature Range 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range 5% - 95% (non-condensing)

この製品の問い合わせ

プロフェッショナルがいるテックウインドの強み

製品検索

製品カテゴリー
製品名
メーカー指定
並び順      
販売状況
販売店情報

会社情報ページへのバナー